The real complexity of any computer system resides in the processor, but do you know how it works? I mean how it really works? How does the code that you write turn into something that does something? When you know how, it’s not magic – just a matter of “fetch” and “execute”.
So far we have looked at the overall workings of a computer andspecifically the memory principle. Memories are devices that when givenone input automatically produce an associated output – reading or willautomatically store the output if it is also presented. The memoryprinciple and memory mechanisms are fascinating but we need more we need something that can execute instructions making use of the memory – weneed a processor.
The processor is quite another level of difficulty.
The processor is the computer
There really is no question of the validity of this assertion.
If you don’t believe me try running a program written for a PC on a Mac.
The point is that computers with different processors are different – computers with the same processor are just faster or slower.
The details of memory management and caching my be impressive but the real complexity of any computer system resides in the processor and itis time to look more closely at how it does what it does.
Even if you think you already know you still might find the explanation interesting. The reason is that many books and courses don’t really tell you the whole story. They stop short and leave you with a sense that the processor is somehow magic even though you know the rough outline of how it all should work.
Elsewhere we have discovered that what makes a computer is the intimate connection between processor and memory. When the processor places an address on the address bus a particular memory location is selected and either stores the data on the data bus or places the data stored in the location on the data bus.
Notice that this isn’t magic. There isn’t a little humanoid that goes and finds a particular memory location by address and then retrieves the contents for the CPU. The action is as automatic as a key in a lock. The CPU puts the address on the address bus and this selects and activates a particular memory location. The read/write line sets the memory location’s behavior and it either places its content on the data bus or it “latches” or stores the contents of the data bus. All automatic.
This might well be the major operating principle of a computer but it leaves out what the processor actually “does” with the data.
After all it is called a “processor” so presumably it doesn’t juststore and retrieve bit patterns. We already know how binary patterns can be used to represent numbers and we know how Boolean logic can be usedto manipulate them – with addition and subtraction.
But this is only part of what goes on. When you first start toconsider the workings of the processor it is usually arithmetic that the focus falls on. The reason is that we often, mistakenly, think ofcomputers as “computers” but for the vast majority of the time acomputer is actually doing something other than arithmetic.
Once you start looking a little more closely the magic seems to bemore to do with how this lump of silicon, or whatever it is made from,can obey the commands in a program. How on earth does it look at thenext instruction in a program, work out what it means and then arrangethe immutable hardware to do it? Software may be soft but hardware ishard and it doesn’t change depending on what the instruction wants it to do.
Once again there is a tendency to think of a little humanoid sittingwhere the processor is waiting for the next instruction to appear andthen doing whatever it commands. This is, of course not how it happensand it is all just as automatic as the memory storage and retrieval.
The “trick” that the processor performs seems very complex but it isall based on building the complex from the simple and the very regular – but isn’t this always the principle when it comes to computers?
The first thing a processor needs is some way of keeping track of where it has reached in the program. This is using a single internal memory location, usually called the “Program Counter” or PC – and it doesn’t count programs! All internal memory locations within the processor are called “registers” for historical reasons and to indicate that they are generally just a little more than simple memory locations. For example, the PC register has two operations that it can perform. It can be initialized to a set value and it can be incremented, i.e. it can add one to the value stored in it.